Doors and hatches

Shelter doors and hatches are meant to be used in all shelters from lighter K protection class shelters to heavier S6 protection class bedrock shelters, where they are installed in the walls of the shelters. Choosing a door and a hatch that are type approved and designed for the particular purpose makes it possible to sustain overpressure in the shelter and secure its gas-tightness. Additionally, the door and the hatch protect the shelter from both outside pressure and blasts as well as shrapnel effects. Shelter doors and hatches are controlled by the VTT Technical Research Centre of Finland and they meet the requirements of the Finnish Ministry of the Interior.

Tarkempi tuoteseloste pdf-muodossa.

HVAC inlets

HVAC-inlets are meant to be used in K and S1 protection class shelters, where they are installed in the shelter’s walls. The inlets can also be used in the gas-tight walls of the air vents in the S1, S3 and S6 protection class bedrock shelters, and the S3 protection class shelters that are made of reinforced concrete.  With suitable inlets and clamping devices the shelter can be secured for overpressure and made gas-tight. Inlets also protect the shelter from outside pressure and blasts as well as shrapnel effects.

 

Tarkempi tuoteseloste pdf-muodossa.

Power inlets

Power inlets are designed to correspond to the shelter’s purpose during times of both crisis and peace. Our product range includes inlets with one, two or three pieces, and a SJ-150 cable inlet system. Different lid types and bore sizes of the one-piece inlets and the SJ-150 cable inlet system are available in the detailed product description.

 

Tarkempi tuoteseloste pdf-muodossa


 
Suoja-Expert Oy   |   Hannuksenpelto 3   |   02270 ESPOO, FINLAND   |   Business ID 0567092-7   |   Tel.0207 600 700
Ota yhteyttä!
Powered by Smart Kotisivutyökalu